我准备给X-ADV750安装后尾箱，之前在webike购买了原厂的后货架，这个箱子是配套产品，容积38升大的箱子，可以放置一顶全盔，顶盖为铝合金看上去比较高级，整体重量没有铝箱子那么重，配合原厂尾架安装很稳固。
View Detail
Looks like you access from European region.
Would you shop at webike.eu.com?
- Instock
1,979.29 HKD (40,315 日幣)
Webike點數: +403 pt
(19.78 HKD)
配送訊息
In Stock : 1 left, Ships within 48 hours.
Estimated arrival date around
匹配
HONDA
Open Fit Model Information Table
-
CRF250L
21
-
NC750X
21 (RH09)
-
CRF250 RALLY
(MD47)
-
CRF1000L Africa Twin
-20
查看全部
HONDA
商品以下描述由Google自動翻譯。
商品詳情
●顏色：黑色（附鋁合金面板）
●材質：聚丙烯(PP)×鋁合金面板
●尺寸：（長度）約395mm×（寬度）約450mm×（高度）約320mm
●型式：One Key System
●容量：約38L
●允許載重：6.0kg
■另外所需的安裝零件：
●One・Key・內鎖芯（零件編號：08M70MJED01）
●One・Key・內鎖本體（零件編號：08M71MJED01）
*
※CRF1000L Africa Twin 2BL-SD04 SD04E
ONE KEY・內鎖芯（08M70-MJE-D01）
ONE KEY・內鎖本體（08M71-MJE-D01）
箱蓋鎖（08L73-MJP-G50）
後貨架（08L70-MJP-G50）
後貨架套件（08L73-MKK-D20ZA
※X-ADV 2BL-RC95 RC88E
ONE KEY・內鎖芯（08M70-MJE-D01）
ONE KEY・內鎖本體（08M71-MJE-D01）
箱蓋鎖（08L73-MJP-G50）
後貨架（金屬銀色金屬：08L70-MKH-D00ZA，勝利紅色：08L70-MKH-D00ZB）
※某些安全帽可能無法裝入。
※請不要將貴重物品留置箱內。
※所列產品如有停產或價格變動，恕不另行通知。另外，視產品而定，交期可能較長。
.
適合車輛外觀，還可裝入一頂全罩安全帽。
NEW ARRIVALS IN USED PARTS FOR
NEW ARRIVALS IN USED PARTS FOR
NEW ARRIVALS IN USED PARTS FOR
New arrivals in used
New arrivals in used
會員評論
Reviews with image
Fits:HONDA ADV160 [Applicable model number]KF54-1000001- Installation requires optional carrier bracket (08L70-MKK-D00), top box lock (08L71-K1T-E10), top box 38L mounting attachment (08L73-K0W-JA0), key cylinder set (08M00-MJW-J82) and rear carrier (08L74-K0W-JA0) are req, HONDA CL250 [Applicable model number]MC57-1000001- For installation
Feb 11, 2023
Helpful?
Fits:HONDA ADV160 [Applicable model number]KF54-1000001- Installation requires optional carrier bracket (08L70-MKK-D00), top box lock (08L71-K1T-E10), top box 38L mounting attachment (08L73-K0W-JA0), key cylinder set (08M00-MJW-J82) and rear carrier (08L74-K0W-JA0) are req, HONDA CL250 [Applicable model number]MC57-1000001- For installation
Jan 8, 2022
The aluminum plate on the top gives it a luxurious look.
I think it is angular and has a good Design.
I would like to have about 40 liters if possible.
Helpful?
Fits:HONDA ADV160 [Applicable model number]KF54-1000001- Installation requires optional carrier bracket (08L70-MKK-D00), top box lock (08L71-K1T-E10), top box 38L mounting attachment (08L73-K0W-JA0), key cylinder set (08M00-MJW-J82) and rear carrier (08L74-K0W-JA0) are req, HONDA CL250 [Applicable model number]MC57-1000001- For installation
May 6, 2019
这个后置物箱还是值得说道说道的，38升大的箱子，想放一个XL揭面盔很勉强，箱子如果再高一点就好些，但还是不够大，特别是我的头盔是舒伯特头盔，外形比一般头盔大了不少，再加上XL这个号大，又是揭面盔，哎哟我滴个乖乖，简直就是硬往里面塞啊，把箱子上面都顶起来了。这个箱子还有个问题就是，跑颠簸路面的时候箱子哈拉哈拉的响，即使我已经垫上了最厚的那4个橡胶垫，我也仔细看了，没有可接触后尾架的地方，而且还是空箱子，这肯定又是设计问题，跑颠簸路面声音太难听了，希望以后改进！还有个缺点就是新箱子锁起来非常的费劲！简直要命，得拼命压着才能锁住，打开的时候拼命的使劲掰才能打开，我都怀疑这箱子是不是山寨的。当然优点也是有的，这个箱子密封非常不错！This rear storage box is still worth saying. The 38-litre box is very reluctant to put a XL face helmet. The box is better if it is taller, but it is still not big enough, especially my helmet is a Schubert helmet. The shape is much larger than the average helmet. Plus the XL is a big one, and it is a face-lifting helmet. When I drop a slap, it is just hard to stuff it inside and put the top of the box up. The problem with this box is that the box halahara sounds when running bumpy roads. Even if I have padded the thickest 4 rubber mats, I have carefully looked at them, there is no place to touch the rear tailstock. And it is still empty, this is definitely a design problem, the sound of running bumps is too hard to listen to, I hope to improve in the future! Another disadvantage is that the new box is very hard to lock! It’s almost terrible, I have to work hard to lock it, and when I open it, I can hardly open it. I wonder if this box is a cottage. Of course, the advantages are also there, this box seal is very good!translated by Google Translator
View Detail
Helpful?
Fits:HONDA ADV160 [Applicable model number]KF54-1000001- Installation requires optional carrier bracket (08L70-MKK-D00), top box lock (08L71-K1T-E10), top box 38L mounting attachment (08L73-K0W-JA0), key cylinder set (08M00-MJW-J82) and rear carrier (08L74-K0W-JA0) are req, HONDA CL250 [Applicable model number]MC57-1000001- For installation
Mar 3, 2019
後置物箱がいい，尾箱と尾架と一緒に買ったのは、とても素敵でした。残念ながら、ロックやロックの芯がありませんでした。また、ロック・コアの購入を再開する必要があります。これは私が初めてこのサイトで買い物をしました。いつまでも税金を払わないでください。It was a nice postcard box, it was very nice to buy with the tail box and the tailpiece. Unfortunately, there was no lock or lock core. You also need to resume purchasing the lock core. This is my first time shopping at this site. Please do not pay taxes forever.translated by Google Translator
View DetailHelpful?
Fits:HONDA ADV160 [Applicable model number]KF54-1000001- Installation requires optional carrier bracket (08L70-MKK-D00), top box lock (08L71-K1T-E10), top box 38L mounting attachment (08L73-K0W-JA0), key cylinder set (08M00-MJW-J82) and rear carrier (08L74-K0W-JA0) are req, HONDA CL250 [Applicable model number]MC57-1000001- For installation
Dec 18, 2017
I think the genuine parts compared to the quality of the deputy factory modified parts better,Design is also particularly reasonable, the installation does not need to be modified, can be installed directly on the motorcycle.Hopefully these bulky accessories, which are mailed to overseas, need to be protected from damage.
View DetailHelpful?
Full Custom Build Inspiration
